Hobbywing 30203700 - Platinum HV 160A V4 ESC for Aircraft - Pilot Tunable ESC  [HW-30203700]

HOBBYWING Platinum HV 160A V4 - 30203700
Price:
NZD$0.00
Brand:
Hobbywing
Model:
HW-30203700
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING Platinum HV 160A V4 - 30203700" title="HOBBYWING Platinum HV 160A V4 - 30203700"
alt="HOBBYWING Platinum HV 160A V4 - 30203700" title="HOBBYWING Platinum HV 160A V4 - 30203700"
alt="HOBBYWING Platinum HV 160A V4 - 30203700" title="HOBBYWING Platinum HV 160A V4 - 30203700"

Flight ESC Optimised for Thermal Management

The Hobbywing 30203700 - Platinum HV 160A V4 ESC for Aircraft is designed to keep temperatures in check during demanding sessions. Its aluminium casing features engineered vents and a duo stacked architecture that accelerates heat transfer from internal parts to the outer case.

Stable Throttle via 32-bit Control

Equipped with a 32-bit processor and an advanced algorithm, this ESC delivers reliable motor speed regulation across flight regimes. Pilots can adjust the speed-governing sensitivity to suit different rotor setups and flying preferences.

Specifications

  • Type: Brushless ESC
  • Voltage: High Voltage
  • Continuous/Peak Current: 160A/200A
  • Input Voltage: 6-14S LiPo
  • BEC Output: Switch Mode: 5-8V, 10A
  • Size: 106.0x50.0x34.0mm
  • Weight: 282g

Programming Choices and Accessories

Firmware updates are supported and the ESC can be configured using an LCD Program Box or the WiFi Module for wireless setup. There is no transmitter programming option, but the separate program port makes adjustments straightforward.

Well suited to hobby pilots who need precise governor tuning and dependable cooling for high voltage aircraft setups.

Which LiPo cell counts are supported?

The ESC supports a 6S to 14S LiPo range, covering most high voltage aircraft battery packs.

How do I change governor sensitivity?

Adjust governor sensitivity through the LCD Program Box or the WiFi Module using the program port to access the relevant parameters.

Can I use a separate BEC for servos?

The built-in switch mode BEC provides 5-8V at up to 10A, but you can choose an external BEC if your servo load requires more current.

Is the unit suitable for aerobatic helis?

Yes, the combination of thermal design and precise speed regulation makes it appropriate for aerobatic or 3D helicopter setups within its voltage and current limits.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved