HOBBYWING 30216100 SkyWalker 60A Aircraft ESC  [HW-30216100]

HOBBYWING SkyWalker 60A UBEC - 30216100
Price:
NZD$69.24
Brand:
Hobbywing
Model:
HW-30216100
Condition:
Brand New
Write a review

Compact Performance from the HOBBYWING 30216100

The HOBBYWING 30216100 Aircraft ESC offers compact, dependable performance for pilots wanting clean throttle control across a variety of airframes. It balances lightweight construction with useful feature set for weekend flying and club days.

Power and Battery Flexibility

Rated at 60A continuous with an 80A peak, this ESC manages demanding throttle loads while compatible with 2-6S LiPo chemistry. That battery range gives flexibility for both sport and scale setups without sacrificing stability.

Programming Options and BEC Stability

Adjust settings via a transmitter interface or an LED program card depending on your preference. The switch-mode UBEC provides a steady 5V at 5A to keep servos and radio gear powered during longer sessions.

Small Footprint, Easy Integration

Measuring 77.0x35.0x14.0 mm and weighing 63g, the HOBBYWING 30216100 easily installs into tight compartments. It does not include prewired connectors so you can fit the 14AWG wiring and connectors that suit your build.

Specifications

  • Continuous/Peak Current: 60A/80A
  • Battery Compatibility: 2-6S LiPo
  • BEC Output: Switch Mode: 5V, 5A
  • Size: 77.0x35.0x14.0 mm
  • Weight: 63g

For flyers who need compact power and straightforward setup, the HOBBYWING 30216100 is a solid choice that keeps electronics powered and controllable.

Yes, its lightweight design and 2-6S compatibility make it suitable for many scale gliders that require reliable throttle modulation rather than extreme currents.
You can change throttle and brake settings through your transmitter or use an LED program card for direct access to advanced options. Check the manual for parameter ranges.
Standard practice is to use 14AWG motor leads as supplied wiring allows, or upgrade if your motor demands higher current for extended bursts.
The 5V/5A switch-mode UBEC can support several digital servos, but for many high-torque digital servos used simultaneously, consider a separate power source to avoid voltage sag.
Mount it with vibration-damping tape and allow airflow around the unit to keep temperatures down during extended flights. Leave space for wiring and connectors when planning the install.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved