Hobbywing 30401050 3100KV Sensored Motor for 1/10 Light-Duty Trucks  [HW-30401050]

HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050
Price:
NZD$0.00
Brand:
Hobbywing
Model:
HW-30401050
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050" title="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050"
alt="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050" title="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050"
alt="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050" title="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050"
alt="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050" title="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050"
alt="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050" title="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050"
alt="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050" title="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050"
alt="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050" title="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050"
alt="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050" title="HOBBYWING XERUN-3652SD-3100KV-D3.175-G2 - 30401050"

Compact 3100KV Drive from the Hobbywing XERUN-3652SD

The Hobbywing XERUN-3652SD-3100KV-D3.175-G2, model number 30401050, is a sensored brushless motor made for 1/10 scale RC vehicles. With a 3100KV rating it provides a balanced mix of speed and torque suited to light-duty short course trucks, trucks and monster trucks used on mixed surfaces.

Tuning and Torque Characteristics

The motor's four-pole construction increases torque and smooths delivery under load. Timing is adjustable between 20 and 40 degrees so tuners can dial in response for different track conditions. It runs on 2-3S LiPo packs to match a variety of setups and battery preferences.

Specifications

  • Scale: 1/10th
  • Type: Brushless, Sensored
  • Pole Count: 4
  • KV Rating: 3100
  • LiPo Cells: 2-3S
  • No-load Current: 2.9A
  • Resistance: 8.7mΩ
  • Outer Diameter: 36mm (1.417in)
  • Length: 52.5mm (2.067in)
  • Shaft Diameter: 3.175mm (0.125in)
  • Weight: 192g (6.77oz)
  • Shaft Length: 15mm (0.591in)
  • Timing: 20-40 Degrees (Adjustable)
  • Applications: 1/10th Light-duty SCT/Truck/Monster Truck

A good choice for enthusiasts who want a sensored brushless upgrade that stays predictable across different setups and driving conditions.

Yes, pair it with any ESC that supports sensored brushless motors and is rated for your battery voltage. Confirm the ESC firmware and wiring are set for sensored operation to avoid startup issues.
The 3.175mm (0.125in) shaft is a common size that fits many pinions used in 1/10 vehicles. Verify fit and secure the pinion set screw properly to prevent slippage under load.
Start in the middle of the timing range and test on your chosen surface. Increase timing in small steps to gain top end, or reduce it for smoother low speed control and cooler running.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved