Hobbywing 30404307 QuicRun-3650SD-21.5T G2 1/10 Sensored Brushless  [HW-30404307]

HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307
Price:
NZD$87.92
Brand:
Hobbywing
Model:
HW-30404307
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307" title="HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307"
alt="HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307" title="HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307"
alt="HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307" title="HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307"
alt="HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307" title="HOBBYWING QuicRun-3650SD-21.5T G2 - 30404307"

Sensored Brushless Unit Built for Scale Vehicles

The Hobbywing QuicRun-3650SD-21.5T G2, model 30404307, is a sensored brushless motor aimed at hobbyists who run both sealed tracks and rougher courses. It brings steady commutation and practical power delivery for 1/10 scale rigs.

Notable Traits of the QuicRun-3650SD-21.5T G2

With a KV of 1800 this motor works well across a number of vehicle types, from lightweight touring cars to compact off-road machines. It accepts 2-3S LiPo batteries and features fixed timing to reduce surprises in throttle response. The motor body is 36mm across and 52.8mm in length, weighing 187g and using a 3.17mm shaft.

Specifications

  • Type: Brushless Sensored
  • KV Rating: 1800
  • LiPo Cells: 2-3S
  • No-load Current: 1.3A
  • Outer Diameter: 36mm
  • Length: 52.8mm
  • Shaft Diameter: 3.17mm
  • Weight: 187g

For modelers who mix track days with rougher runs, this motor offers dependable, sensored performance that slots into many 1/10 platforms.

Yes, the motor is rated for 2S and will run well on a 2S LiPo, offering smoother torque and easier control for tight circuits.
This unit is a sensored motor. If you need sensorless operation check your ESC capabilities, but the motor itself relies on sensors for precise low-speed control.
Keep the bell and bearings clean and check the shaft for play. Regularly inspect wiring and mounting screws to ensure consistent performance.
Dimensions are standard for many 1/10 setups, but verify motor mount spacing and clearance before purchase to confirm fitment.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved