Hobbywing 30408007 - Precision Sensored Motor 1/10  [HW-30408007]

HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007
Price:
NZD$0.00
Brand:
Hobbywing
Model:
HW-30408007
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007" title="HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007"
alt="HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007" title="HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007"
alt="HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007" title="HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007"
alt="HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007" title="HOBBYWING JUSTOCK-3650SD-21.5T G2 - 30408007"

High-precision sensored drive for competitive 1/10 RC

The Hobbywing JUSTOCK-3650SD-21.5T G2 provides fine throttle control and steady torque for 1/10 scale vehicles. Its sensored feedback helps reduce cogging and improves handling through technical sections.

Why racers choose the Hobbywing 30408007

  • Sensored Design: Smooth throttle transitions and consistent response during acceleration.
  • Fixed Timing: No timing adjustments needed so results remain repeatable across runs.
  • 2-Pole Construction: Balanced output for race-oriented gearing and drivetrains.
  • KV Rating: 1800 for use with 2-3S LiPo packs.

Specification table

  • Type: Sensored Brushless
  • Scale: 1/10
  • KV Rating: 1800
  • LiPo Cells: 2-3S
  • No-load Current (A): 1.3
  • Outer Diameter (mm): 35.9
  • Length (mm): 52.5
  • Shaft Diameter (mm): 3.17
  • Weight (g): 182

For club racers and weekend drivers who want consistent lap-to-lap behaviour, the Hobbywing 30408007 is a compact sensored option that balances control and efficiency.

Use an ESC that supports sensored motors to get the best low-speed control; many modern hobby ESCs include a sensored mode for plug and play use.
Yes, the motor suits both surfaces; adjust gearing and power delivery depending on grip levels to avoid overheating or wheelspin.
Use an infrared gun or run short test laps then touch the can briefly; aim to keep temperatures in a range recommended by your ESC and avoid sustained high loads.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved