Hobbywing 80020630 FlyFun 60A V4 ESC Multi Aircraft Unit  [HW-80020630]

HOBBYWING FlyFun 60A V4 - 80020630
Price:
NZD$0.00
Brand:
Hobbywing
Model:
HW-80020630
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Compact ESC Optimised for Hobby Aircraft

The Hobbywing FlyFun 60A V4 ESC, model number 80020630, is designed for general RC flying use across fixed-wing models, small helis and compact multirotors. It features quality imported components and a low impedance PCB to maintain strong current endurance and steady operation under varied conditions.

Adjustable Parameters for Fine Tuning

Access a broad set of programmable parameters using an LED program card or transmitter programming to match the ESC to different motors and prop setups. This lets you tweak throttle curves and cutoffs for cleaner handling.

Comprehensive Protection Features

The FlyFun 60A V4 incorporates protections against abnormal input voltage, overheating, signal loss and low voltage situations, all intended to protect the ESC and prolong reliable service.

Specifications

  • Type: Brushless (BL)
  • Current: 60A continuous / 80A peak
  • Input: 2-6S LiPo
  • BEC Output: Linear mode: 5V, 3A
  • Output Wires: Blue-14AWG-100mm x 3
  • Output Connectors: 4.0 Gold Connectors (Female)
  • Programming: Via Transmitter, LED Program Card Supported
  • Size: 83.0x31.0x16.0mm
  • Weight: 63g

Is the FlyFun 60A V4 suitable for lightweight FPV rigs?

Yes, for lightweight and low-power FPV setups the 60A continuous rating is adequate when matched to appropriate motors and props, especially using 2-4S packs.

Does the ESC include a built-in BEC and what is its output?

The FlyFun includes a linear BEC with a 5V, 3A output suitable for powering receivers and servos in many small to medium models.

Are programming accessories required to set advanced options?

Advanced tuning is easiest with the LED program card, but common changes can also be made through transmitter programming if your radio supports it.

What size connectors are fitted to the motor outputs?

The ESC uses 4.0mm gold female output connectors on the motor leads, suitable for many common brushless motor cables.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved