HOBBYWING QuicRun WP 1060 Brushed ESC - 30120201 Easy Setup Brushed Unit  [HW-30120201]

HOBBYWING QuicRun WP 1060 Brushed - 30120201
Price:
NZD$46.96
Brand:
Hobbywing
Model:
HW-30120201
GTIN:
6938994413084
Condition:
Brand New
Write a review
alt="HOBBYWING QuicRun WP 1060 Brushed - 30120201" title="HOBBYWING QuicRun WP 1060 Brushed - 30120201"
alt="HOBBYWING QuicRun WP 1060 Brushed - 30120201" title="HOBBYWING QuicRun WP 1060 Brushed - 30120201"
alt="HOBBYWING QuicRun WP 1060 Brushed - 30120201" title="HOBBYWING QuicRun WP 1060 Brushed - 30120201"

Practical Brushed ESC for 1/10 Scale Models

Whether you run at the local track or practise in the backyard, the HOBBYWING QuicRun WP 1060 Brushed ESC - 30120201 is built for straightforward installation and dependable operation. It gives new and intermediate flyers a reliable brushed option without complex programming.

Balanced Output with Built-In Protection

The QuicRun WP 1060 combines rugged components and tested control logic to deliver steady current and protection against overload situations. The result is consistent power delivery and less worry during spirited driving.

User-Friendly Calibration and Tuning

Auto throttle calibration gets you moving quickly, and jumper-cap adjustments let you tune throttle curve and braking with minimal fuss. This is handy when swapping motors or testing different setups.

Specifications

  • Type: 1/10 Scale, Brushed
  • Waterproof: Yes
  • Continuous/Peak Current: 60A/360A
  • Input: 2-3S LiPo, 6-9 Cells NiMH
  • BEC Output: Switch Mode: 6V/3A
  • Connectors: TAMIYA Connector, 4.0 Bullet Connectors
  • Dimensions: 36.5x32.0x18.0mm
  • Weight: 39g

For straightforward operation and robust protection in 1/10 scale brushed rigs, the QuicRun WP 1060 is a practical choice that keeps maintenance simple while delivering dependable performance.

Yes, the ESC is waterproof, but it is good practice to rinse and dry components after exposure to water or mud to avoid long term issues.
No separate BEC is required for common servos since the ESC provides a switch mode BEC at 6V/3A, which suits most standard servos in 1/10 models.
It can be used in low speed crawling rigs, though torque and gearing should be matched to the ESCs current limits for best results.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved