Hot Bodies Cyclone SSG Tuning Upper Deck CY-16/SG by 3Racing  [CY-16/SG]

Hot Bodies Cyclone Sport Version /Racing Version SSG Graphite Upper Deck - 3Racing CY-16/SG
Price:
NZD$33.34
Brand:
3Racing
Model:
CY-16/SG
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Upper deck brace for Cyclone SSG

The CY-16/SG graphite upper deck is made to fit Hot Bodies Cyclone Sport and Racing SSG layouts and serves as an OEM-style chassis brace. It is intended to alter torsional rigidity and refine handling characteristics at the chassis level.

Mounting follows the Cyclone SSG pattern and uses the same attachment points as the standard upper deck. Installation is straightforward for modelers experienced with chassis removal; check alignment and fastener torque to maintain geometry and prevent binding in steering and suspension joints.

Use this deck as a measured tuning change rather than a single fix. Adding stiffness redirects loads through the chassis, which can cut down flex in corners and modify weight transfer. Pair the upgrade with progressive changes to damper setup and anti-roll adjustments to find the best balance for your track.

Specifications

  • Item: Graphite Upper Deck
  • Material: Graphite
  • Model Number: CY-16/SG
  • Compatibility: Hot Bodies Cyclone Sport Version / Racing Version SSG

Use the CY-16/SG when you want a simple, direct-fit graphite upper deck to tune chassis stiffness on Cyclone SSG cars, then refine suspension settings to suit the new chassis response.

Is this a direct swap for the standard deck?

Yes, the deck uses the stock Cyclone SSG mounting points for direct replacement. Confirm hole alignment and seating before tightening final fasteners.

Will it make the car stiffer overall?

It increases local torsional stiffness across the upper chassis, which can reduce unwanted flex and change how the car transfers weight through a corner.

Should I change my shock setup after installing?

Yes, small adjustments to damping and spring preload are advised to match the altered stiffness. Make one change at a time and test to see its effect.

Any special care for graphite parts during fitting?

Avoid overtightening fasteners and inspect screw threads for burrs. Seat parts carefully and use correct torque to prevent stress fractures in the graphite.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved