HPI Bullet 3.0 MT and ST Steering Upgrade - Alloy Linkage BMT048 by GPM  [BMT048]

HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048
Price:
NZD$31.67
Brand:
GPM
Model:
BMT048
GTIN:
4894538028263
Condition:
Brand New
Write a review
alt="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048" title="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048"
alt="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048" title="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048"
alt="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048" title="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048"
alt="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048" title="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048"
alt="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048" title="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048"
alt="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048" title="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048"
alt="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048" title="HPI Bullet 3.0 Mt And St Alloy Steering Assembly With Bearings - 3pcs set - GPM BMT048"

Alloy steering upgrade for HPI Bullet 3.0 MT and ST

This 3 piece alloy steering assembly is intended for HPI Bullet 3.0 MT and ST models and carries model number BMT048 from GPM. The components are aluminium alloy steering parts fitted with ball bearings to serve as replacements or performance upgrades for the Bullet 3.0 MT and ST series.

The set is focused on stiffening the steering linkage and adding bearing support to limit play and keep alignment under nitro off-road conditions. Many hobbyists choose this metal option to change steering feel and to increase durability compared to stock components.

Specifications

  • Item: Alloy Steering Assembly with Bearings - 3pcs set
  • Material: Aluminium alloy
  • Model Number: GPM BMT048
  • Compatibility: HPI Bullet 3.0 MT and ST

Use this alloy steering assembly when you want a firmer steering response and bearing-supported linkages for HPI Bullet 3.0 MT/ST on nitro off-road tracks.

Is this an OEM HPI part?

This is an aftermarket upgrade compatible with HPI Bullet 3.0 MT and ST, not an OEM HPI component.

Will the bearings need maintenance?

Bearings should be checked and re-lubricated periodically, especially after muddy or wet runs, to ensure smooth steering.

Can I fit this with my existing servo saver?

In most cases the alloy linkages install with the existing servo setup, but verify clearance and linkage lengths before final assembly.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved