HPI Savage 21 Reinforced Suspension Chassis 4.75mm with Titanium Dog Bone SAV1014VL by GPM  [SAV1014VL]

HPI Savage 21 Alloy Suspension 4.75mm Chassis With Additional Titanium Dog Bone(1pc) With Screws & Delrin Collars - 1pr set - GPM SAV1014VL
Price:
NZD$91.70
Brand:
GPM
Model:
SAV1014VL
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Reinforced alloy suspension chassis for Savage 21

This aftermarket alloy lower chassis is built for compatibility with HPI Savage 21 models and is supplied as a 1pr set including an extra titanium dog bone, mounting screws and Delrin collars. It is aimed at drivers who want a more robust lower plate to support altered suspension geometry and driveline linkages without changing the basic Savage 21 layout.

The 4.75mm alloy plate provides increased torsional rigidity relative to common stamped steel parts while keeping weight appropriate for most off-road builds. The extra titanium dog bone (1pcs) serves as a spare driveline component and arrives with the fasteners and Delrin collars for immediate fitting or trial setups.

Installation guidance: this part replaces the factory lower chassis on Savage 21 cars, interfaces with existing suspension mounts and driveshafts, and requires routine RC hand tools plus a check of clearance for steering and travel before full assembly.

Specifications

  • Item: Alloy suspension chassis with additional titanium dog bone, screws and Delrin collars, supplied as 1pr set
  • Material: Aluminum alloy chassis, titanium dog bone, Delrin collars
  • Model Number: SAV1014VL
  • Compatibility: HPI Savage 21

Ideal for track or trail builds that need a firmer lower plate and a spare titanium dog bone for Savage 21 upkeep; always confirm fit against your existing shock and driveline components before finishing the install.

Does this fit the standard Savage 21 mounting pattern?

Yes, it is designed to fit the Savage 21 lower chassis mounting points, but you should verify hole alignment and clearance with your current components before final fitting.

Are the supplied collars compatible with common dog bones?

The kit includes Delrin collars matched to the supplied titanium dog bone and standard Savage 21 driveline dimensions; they are intended to replace worn collars or to be used in alternate setups.

Will the thicker plate add too much weight?

The 4.75mm alloy adds stiffness with only modest weight increase compared with some steel plates; measure balance and adjust shock tuning if you notice changes in handling.

Can I use threadlocker on the supplied screws?

Yes, apply a suitable medium-strength threadlocker if you want to reduce fastener loosening, and torque to the values recommended for your hardware type.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved