HUDY 293701 1/10 Formula Wing — White front aero part for tuning  [HSP-293701]

Price:
NZD$32.24
Brand:
HUDY
Model:
HSP-293701
Condition:
Brand New
Write a review

Overview of the 1/10 front aero wing

The HUDY 293701 front wing is produced for 1/10 formula style RC cars and arrives in a white finish for hobby use. It is intended as either a replacement component or a starting wing for aerodynamic experiments on compatible bodies.

To fit the wing, position it against the intended mounting area and secure temporarily to confirm alignment. Use the body’s original fixings when possible, or compatible small screws; if body trimming is needed, remove only small amounts of material and recheck full steering and suspension movement.

For setup work, vary mounting height and angle in small steps to observe handling changes. Compare handling feedback or lap times after each alteration to determine effective adjustments for your chassis and the track surface.

Specifications

  • Item 1/10 Formula Front Wing
  • Model Number 293701
  • Material Manufacturer did not specify
  • Compatibility 1/10 formula scale RC cars, generally compatible with bodies designed for separate front wings

This wing provides a practical replacement or a neutral baseline for aerodynamics development on 1/10 formula RC models, especially when testing front balance changes.
Remark :
Due to limited stock availability, please notice that some HUDY items may have to order from the factory and the ready time is around 8-12 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What material is the wing made from and how tough is it?

The manufacturer has not specified the material. Treat it as a lightweight aero component and avoid heavy impacts; reinforce mounting points if you expect frequent contact.

How does mounting height influence front-end balance?

Raising the wing generally increases front downforce, which can reduce understeer but may induce more drag. Test incremental height changes and observe corner entry and mid-corner behavior to find a balance for your track.

Do I need a primer before painting the white wing?

Painting success depends on the wing material. If you do not know the substrate, try paint on a small hidden area first or use paints recommended for common RC plastics and polycarbonate bodies.

How can I reduce damage after minor crashes?

Use small washers under mounting screws to spread load, inspect for cracks after impacts, and replace the wing if repair would compromise aerodynamic shape or mounting security.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved