Internal Carbon Wishbone Bushing for SRX8GTR EC GP (SER600077) - Serpent 601407  [SER601407]

Inner pivot carbon bushing

This Serpent 601407 carbon wishbone bushing is an internal RC-scale component meant for use on both front and rear wishbones. It positions and guides the inner pivot while preserving the outer linkage geometry. The carbon material offers a durable, low-deflection bearing surface for the wishbone pin and helps maintain suspension alignment under load.

Fitment: install this bushing wherever the original kit specifies an internal wishbone bushing; compatibility includes SRX8GTR EC GP (SER600077). Verify the part number against your chassis prior to fitting.

Installation and maintenance notes: press the bushing fully into the wishbone bore, confirm free rotation on the pin, and check for abrasive wear after initial sessions. Swap out worn inserts to prevent inner-pivot play and to keep toe and camber settings stable.

Tuning role: this insert primarily affects pivot smoothness and repeatability rather than the effective spring rate. Carbon's lower compliance sharpens steering and improves predictability, whereas softer inserts can add slight self-centering and smooth response on broken surfaces.