30218 BSx4S One10 Grasper2 Drift Spec - KO Propo  [KO-30218]

#optimum Torque: 16.0Kg-cm maximum rate: 0.09sec/60deg(@7.4V)

#optimum Torque: 12.1Kg-cm maximum rate: 0.11sec/60deg(@6.0V)

#measurements: 40.5×26×21mm (Low Profile)

#body fat: 51.0g

#Operating voltage: 6.0～7.4V (Lipo, Lifestyle, Ni-MH)

#Brush-less engine

#tricky alumite aluminum gear

#twin ball bearings

#rough servo gear shaft

#Aluminum top situation

#Aluminum temperature sink center situation

#Ebony cable

#Gold plated connector

#Serial Suitable

#HCS Compatible

#advocate category

1/10 EP Drift automobile

*The preset of drift might not output many torque and maximum cost as the optimum parameters are set for drift driving, but can be changed with development.