Kyosho 82146 Syncro KRG-331 KSS Receiver Module for Syncro Radios  [KY-82146]

Kyosho 82146 - Syncro KRG-331 Receiver with KSS
Price:
NZD$76.41
Brand:
Kyosho
Model:
KY-82146
GTIN:
4548565402175
Condition:
Brand New
Write a review
alt="Kyosho 82146 - Syncro KRG-331 Receiver with KSS" title="Kyosho 82146 - Syncro KRG-331 Receiver with KSS"
alt="Kyosho 82146 - Syncro KRG-331 Receiver with KSS" title="Kyosho 82146 - Syncro KRG-331 Receiver with KSS"

Reliable KRG-331 receiver with gyro support

The Kyosho 82146 Syncro KRG-331 Receiver with KSS is an electronic receiver module created to layer adjustable stability onto Syncro-compatible transmitters. The unit combines the KSS (Kyosho Stability System) with gyro-assisted correction to ease steering workload in corners and to stabilise straight-line tracking while you tune vehicle settings.

Intended for use with Syncro KT-series transmitters, the receiver takes on coarse stability tasks so users can concentrate on trim and finer menu-based adjustments in the transmitter. Installation follows common small-scale receiver practice; the module connects to servos and ESCs via the Syncro protocol channels and uses standard wiring conventions.

In practical tuning, the receiver works as an added layer: providing general stability and gyro correction while leaving detailed steering response, throttle mapping, and endpoint changes to the transmitter. This approach helps when smoothing transitions on mixed-traction surfaces and when addressing oversteer or understeer tendencies.

Technical Details

  • Item: Syncro KRG-331 Receiver with KSS
  • Material: Electronic module
  • Model Number: 82146
  • Compatibility: Syncro KT231P, KT231P+, KT331, KT432PT, KT431S, KT631ST
  • Key Feature: KSS stability system with gyro support for steering and throttle stability
  • Typical Use: Improve cornering control and straight-line stability while tuning transmitter settings

Compatible Models

  • Syncro KT231P
  • Syncro KT231P+
  • Syncro KT331
  • Syncro KT432PT
  • Syncro KT431S
  • Syncro KT631ST

As an aftermarket receiver module, the Kyosho 82146 KRG-331 with KSS aims to make stability tuning more straightforward for Syncro radios, improving consistent handling across different track and surface conditions.

The KRG-331 is an electronic module intended for small-scale RC mounting. Fit it with appropriate vibration-damping and secure connectors to reduce stress from rough use.
Use a protective foam or a simple receiver box and avoid exposing the module to direct water. Standard moisture-protection practices for electronics are recommended.
By reducing rapid corrective inputs, the gyro can lower continuous strain on steering servos, which may lessen wear under comparable driving conditions.
The module uses standard servo-style signal leads compatible with Syncro channel wiring. Follow standard small-scale wiring practice for secure connections.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved