Kyosho FAT305BK 14-Spoke Front Drift Wheels Black 24mm (Pair)  [KY-FAT305BK]

Overview and fit notes for front drift wheels

This two-piece front wheel set is intended for 1/10 on-road drift chassis and supplied as a pair. The 14-spoke black wheels give a 24mm useful tread width and are compatible with slip-style drift tyres, emphasising easy tyre mounting and front-end setup steps that drifters use.

• Compatibility: Suited to 1/10 on-road drift models and hubs that accept common drift wheel adapters.
• Included: Pair of front wheels, supplied for front axle use only.
• Construction: Plastic 14-spoke moulding with a flat inner mount area for popular drift tyres and foam inserts.
• Use: Ideal for tyre tuning sessions, front-end refresh work, and experimental setup changes.

Quick installation pointers

Test adapter fitment before applying any glue. When mounting softer drift tyres, align the bead carefully and use light adhesive as required. Front wheels are less critical for dynamic balance than driven rears, but a spin test can reveal wobble. Keep orientation marks for directional tyres and carry a spare set for practice.

Maintenance tips for reliable performance

Clean off glue smears with isopropyl alcohol and trim any flash on spokes. If foam inserts compress, replace them since worn inserts alter tyre shape and influence turn-in. For setup work, tweak rear tyre width or compound in small steps while leaving the front set constant to evaluate changes.