Kyosho IF505-12 12T Pinion Gear - Workshop Spare  [KY-IF505-12]

Kyosho IF505-12 - Pinion Gear (12T/VE)
Price:
NZD$17.93
Brand:
Kyosho
Model:
KY-IF505-12
GTIN:
4548565143948
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $19.27 each $-2.68 or -7%
3+ $18.31 each $-1.14 or -2%
Available in shop
Write a review

Tune Your Motor with Kyosho IF505-12 Pinion

The Kyosho IF505-12 Pinion Gear is a simple, effective spare for hobbyists wanting to keep their electric rigs performing well. Its 12 teeth make it a straightforward choice for maintaining smooth torque delivery in everyday use.

Where It Fits

This 12T pinion suits a variety of 1/10 scale electric vehicles and is ideal for routine maintenance or small upgrades. It provides a practical solution when you need a direct, reliable replacement without complicated changes.

Simple Installation Tips

To fit the Kyosho IF505-12 Pinion Gear, confirm the motor shaft fits the bore, slide the gear into place and secure it firmly. Check gear mesh and tighten set screws to avoid movement during runs.

Can I use this pinion on modified 1/10 cars?

Yes for many modified cars, but you must check shaft type and gear module; some custom drivetrains need a different bore or adaptor.

Is any special tool needed to fit it?

Basic tools like an Allen key for the set screw and a small spanner are usually enough; a gear gauge for mesh is handy but not essential.

What upkeep keeps the pinion lasting?

Keep the mesh clean, recheck the set screw after a few runs, and swap the pinion if you see chipped or worn teeth.

Will it affect gear ratios much?

A 12T pinion is a common size and will only change ratio noticeably if you replace a much larger or smaller gear; check overall gearing before changing sizes.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved