Kyosho LA422-11 Stabilizer Bar compatible with SB/ZX7.5/RB7.5  [KY-LA422-11]

Kyosho LA422-11 - Stabilizer Bar (?1.1)(SB/ZX7.5/RB7.5)
Price:
NZD$8.46
Brand:
Kyosho
Model:
KY-LA422-11
GTIN:
4548565524266
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $7.71 each $1.51 or 9%
3+ $7.32 each $3.42 or 13%
Write a review

How this stabilizer affects roll

This Kyosho LA422-11 stabilizer bar serves as an RC replacement component for precise roll-rate tuning on the chassis cited in the product name. As part of suspension setup, the anti-roll bar alters how a car resists roll under cornering and weight transfer, letting you refine understeer or oversteer characteristics without changing springs or oil damping.

Installation depends on matching the bar to the chassis mounting points shown by the model codes in the title. Check linkage geometry and any required hardware swaps before fitting; slight hardware changes are common when exchanging bars between different setups. Follow normal RC maintenance: tighten fasteners to recommended small-model torque and inspect nearby suspension parts for wear.

Treat the stabilizer as a fine adjustment tool rather than a cure-all. Small alterations to bar rate or effective arm length can significantly affect turn-in and mid-corner balance. For repeatable results on paved circuits or indoor tracks, combine stabilizer changes with tyre selection and shock settings.

Compatibility

  • SB
  • ZX7.5
  • RB7.5
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does "1.1" change how the bar fits different models?

The "1.1" is a catalog reference; it does not directly define geometry. Use the code when matching parts, but confirm fitment against the chassis mounting points and linkage before final assembly.

Is this part suitable for regular track use without frequent replacement?

Yes, it is intended as a serviceable replacement. Inspect the bar and mounting hardware periodically for signs of wear or deformation, and replace worn fasteners to maintain secure attachment during repeated running.

What workshop checks should I perform after fitting the bar?

Confirm alignment with the linkage geometry, torque the fixing screws to recommended values for small-model hardware, and verify there is no binding through the suspension travel before returning to track testing.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved