Kyosho LA422-16 Rear Sway Bar for SB ZX7.5 RB7.5  [KY-LA422-16]

Kyosho LA422-16 - Stabilizer Bar (?1.6)(SB/ZX7.5/RB7.5)
Price:
NZD$8.46
Brand:
Kyosho
Model:
KY-LA422-16
GTIN:
4548565524310
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $7.71 each $1.51 or 9%
3+ $7.32 each $3.42 or 13%
Write a review

Build and longevity notes

The LA422-16 rear stabilizer bar by Kyosho is supplied as a direct-fit upgrade for SB, ZX7.5, and RB7.5 chassis that carry the matching part reference. It reduces body roll and helps maintain a more stable platform during cornering, described here with an emphasis on service life and wear considerations.

Fitment follows the vehicle's original rear stabilizer attachment points so there is no need for custom brackets. Installers should check mounting faces and fasteners for corrosion or wear and ensure end links are in good condition to avoid premature loosening or play.

From a maintenance standpoint, inspect the bar and link mountings periodically for signs of abrasion or deformation. Small setup changes will alter load cycles on the rear mounts; monitor them after extended track sessions and adjust as required to preserve longevity.

Compatibility

  • SB
  • ZX7.5
  • RB7.5
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What routine checks extend the life of LA422-16?

Regularly inspect the bar and end link pivots for play, keep fasteners torqued, and clean mounting areas to prevent grit-induced wear that can shorten service life.

Will heavy use cause permanent deformation?

Under normal use the part is designed for repeated track sessions; however, check for bending or cracks after hard impacts and replace if any deformation is found.

Can I refurbish worn mount points?

Minor wear can be addressed by replacing worn bushings or end links and keeping mounting surfaces clean, but severely damaged mounts should be replaced to restore safe fitment.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved