Kyosho LAW70 - LD Carbon Front Shock Stay for ZX7 - Lightweight 5mm Plate  [KY-LAW70]

Kyosho LAW70 - LD Carbon Front Shock Stay (ZX7/t=5.0)
Price:
NZD$68.03
Brand:
Kyosho
Model:
KY-LAW70
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Kyosho - LAZER ZX series category
Write a review

Tune Your ZX7 with Kyosho Carbon Precision

The Kyosho LAW70 - LD Carbon Front Shock Stay for ZX7 has been designed for the ZX7 chassis to give a stiff, low mass front brace using 5mm carbon. Its construction focuses on reducing front-end flex while keeping the weight down so the car stays responsive on high grip surfaces.

Why Pick Carbon for the Shock Stay?

Carbon fibre offers great stiffness without the weight penalty of some metals. The 5mm thickness on the LAW70 helps hold suspension geometry steady under heavy corner loads, which improves repeatability and driver confidence.

Setup Tips for Sticky Track Use

With more front stiffness you may notice sharper turn-in and cleaner mid corner behaviour. Small adjustments to shock damping or sway settings can help dial in balance after fitting the stay.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the LAW70 work with aftermarket ZX7 conversions?

It is manufactured for ZX7 geometry, so it fits standard towers. If a conversion changes mounting points you should compare patterns before fitting.

Does this stay save weight compared to alloy parts?

Carbon generally trims mass while adding stiffness. Exact savings depend on the part you replace, but the LAW70 focuses on stiffness without adding undue weight.

Any special hardware needed?

Standard mounting screws for the ZX7 are normally suitable. Use correct thread engagement and avoid oversized washers that can stress the carbon.

How do I check for damage after a crash?

Inspect for surface cracks, delamination or broken mounting holes. Small scuffs are cosmetic but structural defects mean replacement is the safe option.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved