Kyosho MBB08 Mini-Z MB-010 Transparent Body Set (LAZER ZX6)  [KY-MBB08]

Kyosho MBB08 - Clear Body Set(LAZER ZX6)
Price:
NZD$30.15
Brand:
Kyosho
Model:
KY-MBB08
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Unpainted Kyosho MBB08 Body

The Kyosho MBB08 is delivered as a clear polycarbonate body intended for Mini-Z buggy use, echoing the lines of the LAZER ZX6. The clear shell gives modellers a blank canvas for masking, layering paints, and detailed trimming to suit MB-010 chassis mounting patterns.

Geared toward enthusiasts refining Mini-Z buggy performance, the shell's shape and possible weight changes from painting or trimming can affect handling. Follow standard Mini-Z trimming guides and use paints suitable for clear RC plastics for best results.

Fitment advice: place the shell over MB-010 posts and inspect steering and suspension clearance at full travel before final cutting. Do a careful trial fit with current posts and fasteners, mark required cuts, and finish trims with fine sanding to avoid cracks.

Specifications

  • Item: Clear body set
  • Material: Clear body
  • Model Number: MBB08
  • Compatibility: Mini-Z Series MB-010, LAZER ZX6

Offered as a genuine replacement shell, the MBB08 lets builders replace damaged bodies or experiment with paint schemes while preserving MB-010 mounting alignment and ZX6-inspired styling.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I prepare the surface before painting?

Lightly clean with isopropyl alcohol and, if required, scuff gently with fine abrasive to improve paint adhesion—always use paints made for polycarbonate bodies.

Will adding paint noticeably increase weight?

Paint adds a small amount of weight; heavy multi-layer finishes will have more effect on balance, so plan trims and paint thickness when tuning handling.

Can I fit this shell to other Mini-Z chassis?

The shell is shaped for MB-010 mounting geometry; it may be adaptable to other Mini-Z layouts but will likely require additional trimming and repositioning of posts.

Are there reinforced zones to prevent cracking when trimming?

Trim with care and avoid sharp corners; smoothing edges and using gradual curves reduces stress points. Reinforce critical areas with thin polycarbonate tape if needed.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved