Kyosho Mini Inferno ST 64 4.8mm Titanium Ball Studs Upgrade MIF-004 by 3Racing  [MIF-004]

Aftermarket 4.8mm ball studs

This 10-piece kit offers 4.8mm titanium ball studs marked MIF-004 for use in the Kyosho Mini Inferno ST 64 steering and suspension link positions. Parts are sized for direct swap with standard ball studs.

Use the kit to replace damaged studs or to reduce corrosion and rotating mass compared with stock steel hardware. Fitting is straightforward: free the linkage, remove the old stud, screw in the new stud and check that the ball moves freely and that threads are engaged correctly.

Installation notes: use suitable hand tools, do not over-torque into plastic mounts, and verify alignment after fitting. Apply thread-locker on metal-to-metal threads if the model sees heavy vibration, and observe manufacturer cure recommendations before powering up.