KYOSHO Mini-Z 2mm Aluminium Lock Nuts Compatible with MR-015/MR-01/MR-02 3RAC-N20/TI by 3Racing  [3RAC-N20/TI]

Kyosho Mini-Z MR-015 Mini-Z AWD /MR-01 /MR-02 (MM) /MR-02 (RM) /MR-015 3RACING 2MM ALUMINUM LOCK NUTS (TITANIUM) - 10 PCS - 3RACING 3RAC-N20/TI
Price:
NZD$7.54
Brand:
3Racing
Model:
3RAC-N20/TI
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Overview of 2mm aluminium lock nuts

The 3RAC-N20/TI pack comprises 10 2mm aluminium lock nuts with a titanium-colour finish, produced as scale accessory hardware for Kyosho Mini-Z vehicles. These nuts are matched to 2mm threaded fasteners typically fitted on Mini-Z MR-015, Mini-Z AWD, MR-01 and MR-02 chassis variants.

These aluminium lock nuts are useful when you want a lower profile and reduced weight compared with steel fasteners for securing chassis points, body posts or small brackets on Mini-Z cars. Fit by hand-threading onto the 2mm bolt and using a small hex or nut driver for final seating, taking care not to over-tighten.

As part of routine setup and maintenance, aluminium nuts make quick component swaps easier and serve well as spare hardware. Verify thread compatibility on a single test fastener before changing critical mounts and carry spares for field service.

Do these fit Mini-Z AWD and MR-02 cars?

Yes, they are listed for Mini-Z AWD and MR-02 variants as long as your chassis uses standard 2mm threads; check the fastener size before fitting.

Are these nuts reusable after removal?

Aluminium nuts can be reused but inspect threads for wear; avoid repeated over-torquing and replace if threads show damage.

What is the best practice for tightening?

Hand-start first, then tighten gently with a small driver. Use moderate torque only and consider thread locker on high-vibration points if appropriate for aluminium hardware.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved