KYOSHO Mini-Z AWD Damper Tension Shim AWD-12 for indoor track setup by 3Racing  [AWD-12]

This damper tension shim is a compact RC tuning piece for KYOSHO Mini-Z AWD chassis that adjusts preload and damper response. It provides a direct mechanical change to how the damper behaves in compression and rebound, handy when refining entry balance and mid-corner control on smaller circuits.

Function: the shim sits inside the damper cartridge or cap area to alter shaft preload and internal clearance, producing subtle changes in spring behaviour. Because the component is small, its adjustments are designed for fine tuning rather than major setup overhauls.

Fitting guidance: the shim is installed inside the damper cartridge area and generally requires partial disassembly of the damper. Place the shim as indicated by the damper layout, then reassemble and confirm travel and seal integrity. Use routine hobby tools and keep the working area tidy.

Setup advice: try one shim at a time and run incremental tests. Note changes to preload and mid-stroke feel, and combine with different springs or oils for a broader tuning range. Keep a simple log of changes for consistent results.