Kyosho Mini-Z F1 Front Toe Connector 3 Degree MKF-02/3 by 3Racing  [MKF-02/3]

Mini-Z F1 front toe connector

This front toe connector is built for Kyosho Mini-Z F1 chassis applications and is supplied as the 3Racing MKF-02/3 unit. It enforces a 3 degree toe angle on the front linkage, giving a fixed toe in or toe out depending on installation orientation.

The component replaces or complements the stock front toe link on Mini-Z F1 cars. Compatibility is specific to Kyosho Mini-Z F1 steering setups, so confirm your chassis mounting points prior to fitting. Installation normally involves removing the stock toe link and positioning this connector in the same linkage locations, then securing with the existing hardware while checking ball or pin engagement.

In tuning terms, the part locks front toe at 3 degrees so you can compare steering behaviour across setups reliably. It works well when you need repeatable geometry for circuit testing or display trimming, and should be used alongside standard setup changes like shock rate and camber tweaks.