Kyosho Mini-Z MR-02 Rear Aluminium 5-Spoke Rim +0.5 Offset - MR02-RP05/LB by 3Racing  [MR02-RP05/LB]

Price:
NZD$8.40
Brand:
3Racing
Model:
MR02-RP05/LB
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Two-tone aluminium rear wheel for Mini-Z

A two-tone light blue aluminium 5-spoke rear rim supplied with a +0.5 offset, intended for Kyosho Mini-Z MR-02 (MM/RM) and MR-015 rear hubs. It is aimed at precise wheel spacing and low-level setup changes on electric or nitro Mini-Z on-road cars that accept these rear wheels.

Fitment is limited to the listed Kyosho Mini-Z chassis; confirm the rear wheel mounting style before fitting. The +0.5 offset adjusts the effective rear track and can free up tyre clearance or alter minor handling traits when tuning camber or roll behaviour on small models.

Fitting notes: swap the rim into your existing rear tyre and hub, ensure tyre bead seating and use adhesive where suitable, then check body shell clearance through full travel and steering sweep. Inspect hex engagement and retorque to the original specification to avoid wheel play.

Will this rim fit foam or rubber Mini-Z tyres?

It fits the same rear tyre/hub assemblies used on MR-02 (MM/RM) and MR-015. Foam and rubber tyres that mount to those rims should fit, but confirm tyre inner diameter and glue method where applicable.

How large is the handling change from +0.5 offset?

The effect is subtle: a slightly wider track at the rear which can improve clearance and tweak lateral balance. It is useful for small-scale tuning rather than major handling overhauls.

Care tips for aluminium rims in club running

Clean with a damp cloth, avoid hitting curbs or hard kerbs, and check wheel nuts and hexes after a few laps to prevent loosening.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved