Kyosho MZW710-05 MR-04 Aluminum Steering Block 0.5-degree Camber - Tuners Edition  [KY-MZW710-05]

Kyosho MZW710-05 - Aluminum Steering Block(0.5 degree camber angle/MR-04)
Price:
NZD$46.69
Brand:
Kyosho
Model:
KY-MZW710-05
GTIN:
4548565481743
Condition:
Brand New
Write a review

Crisper Turn-In for MR-04 Mini-Zs

RC tuners aiming for cleaner corner entry will appreciate the Kyosho MZW710-05 aluminum steering block. Built specifically for the MR-04 chassis, the 0.5-degree camber helps refine steering response and improves balance through bends.

Precision Aluminum Construction for Durable Performance

The MZW710-05 uses high-grade aluminum to offer a stiff yet lightweight option for your Mini-Z. It allows changes to the upper arm mounting points and kingpin tilt so modelers can mimic real-world suspension tweaks at a small scale.

Tuning Range and Compatibility Notes

This steering block is listed among Kyosho's Mini-Z spare parts and is compatible with the MR-04 platform. Pair it with the MZW702 to set camber between 0 and 3 degrees in 0.5-degree increments to suit different track conditions and driving techniques.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I start when tuning camber on the MR-04?

Begin at 0.5-degree increments and test on a familiar track; small changes are easier to assess and recover from, especially on carpet circuits.

Do I need special tools to fit the MZW710-05?

No specialised tools are required beyond common hex drivers and a small spanner for fine alignment checks during installation.

Will the steering block change front-end weight distribution?

The aluminum block is slightly heavier than plastic parts, but the effect is minor; tune shock and arm positions to balance any subtle change in front-end feel.

Can I use this with non-MR-04 Mini-Z bodies?

It is designed for MR-04 fitment; some other bodies or subframes may be compatible but always verify clearances and mounting points before fitting.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved