LaTrax SST 1/18 Aluminium Wheel Hex +1mm SST010/+1MM by GPM  [SST010/+1MM]

Aluminium Hex Adapter for LaTrax SST 1/18

This aftermarket aluminium hex adapter is designed for the TRAXXAS LaTrax SST 1/18 chassis and increases wheel offset by +1mm per side. It is supplied for RC hobby use and allows small, controlled adjustments to track width that change cornering balance.

How it works: the adapter shifts the wheel mounting plane outward by +1mm, providing a small increase in track useful for setup testing or to offset tyre profile changes. The metal construction is stiffer than many stock plastic hexes and helps retain wheel alignment under load during short-course or on-road running.

Fitting guidance: the part is a direct replacement for LaTrax SST 1/18 hubs and comes as a 2 pcs set. Remove the wheel, replace the existing hex with the +1mm adapter, then reinstall the wheel using the original fasteners. Check thread engagement, clearance, and wheel runout before use.

Setup advice: use these adapters when you want a discreet, repeatable lateral adjustment while evaluating tyre choices and suspension settings to dial in entry and mid-corner control on tighter tracks.