Yokomo ZC-206LA Long Ball Studs - Steel Suspension Mod  [ZC-206LA]

Yokomo ZC-206LA Long Ball Studs, Steel
Price:
NZD$4.54
Brand:
Yokomo
Model:
ZC-206LA
GTIN:
0639342217373
Condition:
Brand New
Write a review

Suspension Adjustment with Yokomo ZC-206LA Studs

The Yokomo ZC-206LA Long Ball Studs provide a simple steel solution for adding extra adjustability to your RC model's suspension. These studs let you raise the upper arm to change geometry and clearance for different driving conditions.

When to Fit Longer Studs

Long ball studs are handy when you need extra tyre or body clearance, or when you want to shift camber and roll behaviour. They work well for both competitive setups and recreational offroad runs.

Installation Notes

During installation of the Yokomo ZC-206LA Long Ball Studs, a 5mm box wrench is suggested for tightening the nut to a firm setting. Correct fitting preserves alignment and reduces unwanted movement in the suspension.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these fit my 1/10 touring or buggy?

They are suitable for many 1/10 scale touring and buggy platforms that accept ball studs for the upper link; check your hub and arm thread compatibility before fitting.

Any tips for getting consistent ride height?

Measure and set both sides equally, then test on a short run and recheck the nut tightness. Small adjustments can have noticeable effects on handling.

Is special maintenance required?

Routine checks for security and wear are recommended. Clean threads and retighten as needed, and consider light grease on moving joints where appropriate.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved