LOSI 5IVE-TE 3.0 1/5 Desert Truck Servo Link Upgrade 7075 Alloy 5T3/161 by GPM  [5T3/161]

LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161
Price:
NZD$28.80
Brand:
GPM
Model:
5T3/161
GTIN:
4894538417999
Condition:
Brand New
Write a review
alt="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161" title="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161"
alt="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161" title="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161"
alt="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161" title="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161"
alt="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161" title="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161"
alt="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161" title="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Servo Steering Links - GPM 5T3/161"

Precision 7075 Alloy Steering Link Set

This replacement steering link kit is built for LOSI 5IVE-TE 3.0 vehicles and offers an RC-scale aftermarket option. Each link is CNC machined from 7075-T6 aluminum and treated to resist corrosion, improving rigidity between the servo output and steering knuckles. The set uses a fixed 99.5mm center-to-center spacing to align with factory geometry.

Installation restores a direct mechanical steering connection and reduces compliance under load. These links supersede factory LOS-3702 and are supplied as a pair for correct left and right alignment. Fixed length means they work best where stock steering throw and Ackerman are maintained.

Compatible Models

  • LOSI 1/5 5IVE-TE 3.0 Electric 4WD Desert Truck RTR-LOS05022
  • LOSI 1/5 5IVE-TG 3.0 Gas 4WD Desert Truck RTR-LOS05025

Choose these links when you want a tough, dimension-accurate replacement that keeps the original steering geometry and sharpens steering input response.

They are manufactured to replace LOS-3702 and install without alteration when your vehicle uses the same 99.5mm center-to-center arrangement.
7075-T6 aluminum offers high strength for repeated loads; the corrosion-resistant finish helps maintain performance in harsh environments.
No geometry changes are expected since they use the same fixed center-to-center measurement; they are intended to preserve factory Ackerman when installed as supplied.
After fitting, check alignment and steering throw. Because these are fixed-length, mechanical matching is key before locking down ball links or servo horn screws.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved