LOSI 5IVE-TE 3.0 Rear Hub Set 7075 Alloy Upsized Outer Bearing 5T3/022 by GPM  [5T3/022]

LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Rear Hubs (Larger Outer Bearings) - GPM 5T3/022
Price:
NZD$141.11
Brand:
GPM
Model:
5T3/022
GTIN:
4894538418071
Condition:
Brand New
Write a review
alt="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Rear Hubs (Larger Outer Bearings) - GPM 5T3/022" title="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Rear Hubs (Larger Outer Bearings) - GPM 5T3/022"
alt="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Rear Hubs (Larger Outer Bearings) - GPM 5T3/022" title="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Rear Hubs (Larger Outer Bearings) - GPM 5T3/022"
alt="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Rear Hubs (Larger Outer Bearings) - GPM 5T3/022" title="LOSI 5IVE-TE 3.0 1/5 Desert Truck 7075 Alloy Rear Hubs (Larger Outer Bearings) - GPM 5T3/022"

High-strength 7075 hubs for LOSI 1/5 trucks

This rear hub set upgrades LOSI 5IVE-TE rear wheel mounting and bearing support using 7075-T6 aluminum construction. The components are aimed at hobbyists who want a direct-fit replacement that improves stiffness for desert truck use.

Materials and dimensions: CNC machining from aviation-grade 7075-T6 reduces flex compared with stock cast hubs while keeping mass reasonable. Inner bearing specification is retained at 20x32x7mm; the outer bearing is enlarged to 12x28x7mm from the factory 12x24x6mm to increase load bearing area and spindle contact. The kit is indicated as a direct swap for part LOS-3668.

Fitment advice: hubs follow LOSI 5IVE-TE geometry but verify wheel hex clearance and axle engagement when fitting the larger outer bearing. Reuse OEM fasteners where appropriate and confirm bearing preload and axle seating during reassembly. Standard RC tools suffice for installation.

Performance impact: installing 7075 hubs with a beefier outer bearing reduces hub flex under demanding running and decreases bearing wear, improving reliability for heavy landings and high-speed desert sections. This upgrade alters hub strength rather than suspension kinematics.

The package listing includes two rear hubs and matching inner and outer bearings required to replace both sides of the rear axle.

Compatible Models

  • LOSI 1/5 5IVE-TE 3.0 Electric 4WD Desert Truck RTR-LOS05022
  • LOSI 1/5 5IVE-TG 3.0 Gas 4WD Desert Truck RTR-LOS05025

Owners of the listed LOSI 1/5 vehicles can expect a direct-fit strength upgrade to rear hub hardware with this 7075 hub set while retaining the original inner bearing dimension for simple replacement.

Yes, the item is described as a direct replacement for LOS-3668 on the listed LOSI models, but confirm fitment in your existing assembly before final reassembly.
The kit retains the 20x32x7mm inner bearings and supplies larger 12x28x7mm outer bearings to replace the stock 12x24x6mm units, increasing contact area and load capacity at the wheel spindle.
Modifications are not typically required, but check wheel hex clearance after installation since the outer bearing diameter increases; some clearance checks may be necessary.
Inspect bearing fit and fastener torque regularly, especially after high-impact runs; 7075-T6 is strong but bearings and bolts still require routine attention.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved