LOSI MINI-T 2.0 Centre 59T Steel Spur LM059TS by GPM  [LM059TS]

TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS
Price:
NZD$24.97
Brand:
GPM
Model:
LM059TS
GTIN:
4894538350579
Condition:
Brand New
Write a review
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel #45 Spur Gear 59T - 1pc set - GPM LM059TS"

59-tooth spur for Mini-T 2.0 centre box

This 59-tooth replacement spur is made for the LOSI MINI-T 2.0 2WD platform and identified as model LM059TS. It installs at the main gear location in the centre gearbox to transmit motor torque through the driveline.

The gear is produced from hardened steel #45 to offer better wear characteristics than softer alternatives. Its tooth geometry and dimensional control are held to precise limits to help ensure consistent meshing and stable power delivery during regular RC use.

Tuning and maintenance notes: fit this steel spur when the original is worn or if you prefer a metal option for heavier running. Always verify pinion alignment and bearing seating in the centre gearbox to reduce the chance of uneven wear.

Packing includes

  • Spur Gear - 1pcs

Original Name / Part No:

LOS212015

Will this fit a MINI-T 2.0 centre gearbox?

Yes, LM059TS is sized for the MINI-T 2.0 centre gearbox as the 59T spur replacement.

Is the material stronger than stock?

Made from hardened steel #45, it resists wear and holds tooth form better than most stock plastic spurs.

How do I check gear mesh when fitting?

Set the pinion, fit the spur, then adjust the motor position for a slight running clearance; rotate the gears by hand to confirm smooth engagement before securing bolts.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved