LOSI MINI-T 2.0 Rear Hardened Dog Bone 2.9mm LM495S/SH by GPM  [LM495S/SH]

Mini-T 2.0 Rear Dog Bone Overview

The LM495S/SH dog bone is supplied as a 2pcs aftermarket set to replace the rear dog bone components in TEAM LOSI MINI-T 2.0 2WD cars. It transfers drive from the transmission to the rear wheels in the rear CVD/dog bone position.

Made from hardened steel #45, these dog bones offer greater wear resistance than softer stamped or alloy alternatives, helping to keep wheel rotation consistent under normal hobby use and light track sessions. The shaft diameter increase from 2.1mm to 2.9mm boosts stiffness and lessens the risk of bending or early wear at the joint.

Fit them as direct rear replacements into your existing hubs and verify clearances with driveshaft housings and wheel hexes. If you already run aftermarket hubs or spacers, double check fitment and perform a test spin after assembly. This item is intended as an aftermarket reinforcement for the rear drivetrain.