LOSI PROMO-MX Transmission Gear Set Medium Carbon Steel MX1200S by GPM  [MX1200S]

TEAM LOSI DIRT BIKE PROMO-MX MOTORCYCLE Medium Carbon Steel Transmission Gear set - GPM MX1200S
Price:
NZD$50.10
Brand:
GPM
Model:
MX1200S
GTIN:
4894538376753
Condition:
Brand New
Write a review
alt="TEAM LOSI DIRT BIKE PROMO-MX MOTORCYCLE Medium Carbon Steel Transmission Gear set - GPM MX1200S" title="TEAM LOSI DIRT BIKE PROMO-MX MOTORCYCLE Medium Carbon Steel Transmission Gear set - GPM MX1200S"
alt="TEAM LOSI DIRT BIKE PROMO-MX MOTORCYCLE Medium Carbon Steel Transmission Gear set - GPM MX1200S" title="TEAM LOSI DIRT BIKE PROMO-MX MOTORCYCLE Medium Carbon Steel Transmission Gear set - GPM MX1200S"

Overview for PROMO-MX drivetrain repairs

Made as an RC-scale replacement, this twin-gear set suits LOSI PROMO-MX motorcycles needing renewed gear engagement and consistent rotation under load.

Use the set when worn or damaged teeth affect drive smoothness, or when re-tuning drivetrain response. Access the gearbox, remove the old gears and install the new pair, making sure to set proper mesh with the spur and motor pinion for quiet, even running.

The medium carbon steel material is chosen for predictable wear characteristics and steady engagement, making the set a sensible spare for riders servicing machines between track sessions.

Packing includes

  • Transmission gear set - 2pcs

Original Name / Part No:

LOS262007

Compatible Models

  • LOSI-1/4 PROMOTO-MX MOTORCYCLE RTR, FXR-LOS06000
  • LOSI-1/4 PROMOTO-MX MOTORCYCLE RTR PRO CIRCUIT-LOS06002

This MX1200S set is intended for direct replacement on the listed PROMO-MX machines; always confirm mesh and smooth free rotation before completing the rebuild.

How many gears are provided?

Two gears are supplied, shown under Packing includes, intended to replace the matching pair in the gearbox.

Can I run these with my current pinion?

Yes, provided the pinion is in good condition and mesh is correctly set; inspect the pinion for wear before reuse.

Are shims required for fitting?

Shims may be needed to achieve correct clearance depending on shaft wear; retain or replace shims as needed to avoid binding.

Recommended maintenance after installation?

After fitting, check rotation under hand and after light running, then inspect teeth periodically and replace the set if you detect uneven wear or noise.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved