Yokomo B9-32LA19A Lower Bulkhead (A) for BD9 Chassis, Front Left or Rear Right  [B9-32LA19A]

Yokomo B9-32LA19A Lower Bulkhead (A)(F Left/R Right) for BD9
Price:
NZD$53.22
Brand:
Yokomo
Model:
B9-32LA19A
GTIN:
0639342204472
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD10FF category
Write a review

Durability Notes: Lower Bulkhead (A) and BD9

This lower bulkhead (A) is manufactured to fit BD9-series vehicles and is supplied as a single unit for the front left or rear right location. It is intended as a repair or spare item for BD9 setups.

Material is not specified by the source, so inspect the part on arrival for any machining marks or stress points. Proper installation and correct orientation help maintain intended suspension geometry and protect drivetrain clearance.

Specifications

  • Item: Lower Bulkhead (A), front left / rear right, 1 pcs
  • Material: Not specified
  • Model Number: B9-32LA19A
  • Compatibility: MRTC-BD919, MRTC-BD919S, MRTC-BD10, MRTC-BD10A, MRTC-BD10FF, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA

Compatible Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA

Replacement Yokomo lower bulkhead (A) for BD9 cars, intended to reinstate correct mounting geometry and support consistent suspension and drivetrain behavior after service or crash repair.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is the material and how tough is it?

The source does not list material. Inspect on receipt and consider replacing with an upgraded part if you require higher impact resistance for aggressive use.

Will this survive frequent bashing?

Longevity will vary by driving style and impacts. For heavy bashing, check the part after hard hits and carry a spare to avoid extended downtime.

Can I reinforce this area for extra strength?

Some builders add reinforcement plates or switch to aftermarket materials for added durability. Verify fit and clearance before modifying the chassis.

How should I check the part after a crash?

Inspect mounting faces, screw holes, and any hairline cracks. Replace if alignment surfaces are compromised to maintain predictable handling.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved