Mini 4WD 16-17mm double rollers - M4WD-35/GO golden replacement by 3Racing  [M4WD-35/GO]

Tamiya Mini 4WD Double Aluminum Rollers ( 16-17mm )(Golden) - 3RACING M4WD-35/GO
Price:
NZD$12.85
Brand:
3Racing
Model:
M4WD-35/GO
Condition:
Brand New
Write a review

Double aluminium roller set M4WD-35/GO for 16-17mm mounts

The M4WD-35/GO double rollers provide a metal alternative to standard plastic rollers used on Mini 4WD cars with Tamiya-compatible mounting points. Constructed from aluminum and presented in a golden anodized finish, the pair is intended for hobbyists wanting a tougher contact surface and consistent rolling behaviour on rails.

This set targets chassis that accept 16-17mm roller diameters and is a direct mechanical swap rather than an upgrade to motors or gearing. Before fitting, confirm your chassis' shaft size and mounting spacing. The anodized surface can help reduce visible wear, but inspect each roller for any machining burrs before use.

Is the 16-17mm measurement outer diameter?

Yes, the listed 16-17mm range refers to the roller outer diameter; double-check chassis clearance to prevent contact with bodywork or guide rails.

Are mounting screws and bearings provided?

The listing identifies these as aluminum rollers only. Bearings, screws, and spacers are typically separate items, so confirm the package contents before ordering.

Will these fit MA and MS chassis?

They are suitable for many performance chassis like MA, MS and similar types that use Tamiya-style rollers and accept 16-17mm diameters, provided the shaft and spacing match.

Do anodised rollers hold up on abrasive tracks?

Anodising adds a harder surface layer which helps against light abrasion, but heavy use on abrasive rails will still show wear; inspect regularly and consider refresh intervals for competition use.

How to check fit before installing?

Measure shaft diameter and mount spacing, mount the roller by hand to verify free rotation, and check for any lateral contact when the car is placed on a flat surface.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved