Mini Inferno Compatible ESC Heatsink Orange Woven - MIF-020/OR/WO by 3Racing  [MIF-020/OR/WO]

Overview of the Mini Inferno ESC heatsink

This heatsink is an aftermarket accessory tailored for the Kyosho Mini Inferno ESC area and is listed as 3Racing MIF-020/OR/WO in an orange woven finish. It acts as a passive cooling surface to help lower ESC temperatures where the original assembly has limited ventilation.

Compatibility is focused on the Mini Inferno platform. Do not assume it will fit other Kyosho models or third-party frames without measuring mounting points and checking clearances.

Fitting is simple for hobbyists comfortable with minor disassembly: remove the body shell, clear obstacles around the ESC, attach the heatsink using the ESC's existing brackets or screws, and ensure it does not touch wiring or moving parts. Secure the fasteners carefully to prevent over-tightening plastic bosses.

Use case: by increasing surface area, the heatsink can moderate ESC temperatures during repeated short runs, contributing to steadier throttle response. Remember it is a passive part and works best combined with proper motor and ESC tuning plus sensible airflow routing.

Care tips: confirm clearance after install, keep cables away from the heatsink, and clean dust build-up to maintain thermal efficiency.