Mini Spyder SER440001 7x1 O-ring - Serpent 110315  [SER110315]

Serpent SER110315 O-ring 7x1
Price:
NZD$11.71
Brand:
Serpent
Model:
SER110315
Condition:
Brand New
Write a review

Seal O-ring for Mini Spyder Chassis

This replacement O-ring is specified for the Serpent Mini Spyder Monster truck RTR EP SER440001 and carries the Serpent 110315 part number. Its 7x1 specification makes it suitable for tight sealing points on tiny drivetrain or chassis fittings.

Use the ring to restore sealing function where dirt or fluid ingress is a concern. It is intended for routine upkeep and small repairs; swap out rings that have become brittle, torn, or misshapen to maintain reliable sealing under off-road conditions.

To fit: remove the damaged ring, clean the mating groove thoroughly, and seat the new 7x1 O-ring making sure it lies evenly without kinks. Applying a small amount of compatible lubricant helps with installation and reduces wear during initial running. Keep spare rings stored in cool, dark conditions to preserve elasticity.

Compatibility

  • Serpent Mini Spyder Monster truck RTR EP SER440001

What is the correct installation technique for this O-ring?

Start by removing debris from the groove, then gently stretch the ring just enough to seat it evenly. Avoid twisting as you press it into place to prevent uneven sealing.

Which lubricants are safe to use during installation?

Use a light, RC-compatible silicone or Teflon-based grease sparingly to ease fitting. Do not use petroleum-based products that can swell or degrade elastomer materials.

How should I prepare the groove before fitting a new ring?

Clean the groove with a lint-free cloth and, if needed, a mild solvent safe for plastics to remove grease and grit. Ensure the groove is dry before seating the new O-ring.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved