Mini Spyder SER440001 Front Suspension Lower Arms - Serpent 440106  [SER440106]

Mini Spyder front suspension lower arm replacements

This Serpent 440106 lower arm set supplies the front left and right components used on the Serpent Mini Spyder Monster truck RTR EP (SER440001). They act as direct replacements for the chassis components and help recover correct suspension geometry after impact or wear.

Fitment is limited to the Serpent Mini Spyder Monster truck RTR EP SER440001, so confirm your vehicle's chassis code before ordering. The set is for front installation and intended for maintenance or setup resets rather than as a standalone performance upgrade.

Installation steps: lift the front of the truck, remove the wheel and hub assembly, extract the hinge-pins or pivot hardware, swap the worn lower arms for the new left and right pieces, then reassemble. Finally, validate suspension travel and adjust toe and camber as needed in a controlled drive.

Maintenance advice: installing new lower arms can correct uneven tyre wear and return toe and camber to expected ranges; use them to establish a known baseline before changing shocks or link positions. Also inspect related bolts, ball joints and pins and renew any worn items for reliable operation.