Mini-Z AWD Rear Wide Sinkage Alloy Rims 18p 11mm 1.0mm offset MZA803RW/+1.0 by GPM  [MZA803RW/+1.0]

Mini-z AWD Alloy Rear Wide Sinkage Rims (18p, 1.0mm Off set , Width 11mm) - 1pr - GPM MZA803RW/+1.0
Price:
NZD$11.65
Brand:
GPM
Model:
MZA803RW/+1.0
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Wide rear alloy sinkage rims for Mini-Z AWD setups

This rear rim set is produced for Mini-Z AWD scale models and supplied by GPM under model MZA803RW/+1.0. The wheels follow the 18p spec with a 1.0mm offset and 11mm width to change rear wheel seating and stance on compatible Mini-Z AWD platforms.

These rims focus on RC-scale wheel placement and tyre mounting rather than any road vehicle use. Supplied as 1 pair, they suit hobbyists wanting to tweak rear track, tyre tuck or clearance when adjusting MR-03 AWD style Mini-Z AWD cars.

Fitting guidance: check spline engagement and hub compatibility on MR-03 AWD hubs before final fitting, confirm tyre bead seating on the 11mm rim, and rebalance wheels after mounting. Use standard Mini-Z AWD mounting practice for best results.

Are these compatible with MR-03 AWD hubs?

They are intended for Mini-Z AWD use including MR-03 AWD style hubs, but hub spline and clearance should be checked before committing to glue or screws.

Will these change handling much?

Changing offset and rim width can alter track and tyre tuck which in turn affects handling balance; small changes can be useful for fine tuning.

What size tyres suit these rims?

Use tyres rated for an 11mm rim width and trial fit to confirm bead seating and sidewall clearance on your specific Mini-Z AWD chassis.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved