Mini-Z AWD Ridge Delrin Wheel Set 6pcs 0mm Offset 8.3mm DMZA601FR888 by GPM  [DMZA601FR888]

Mini-Z AWD Delrin wheel set with tyres

This DMZA601FR888 package contains front and rear Delrin ridge rims that come with tyres already fitted, aimed at Mini-Z AWD models. The listing shows a 6pcs mounting pattern, 0mm offset and an 8.3mm rim width, sold as a single pair for model tuning and track use. The basic dimensions are chosen to suit common Mini-Z AWD wheel assemblies and on-car setups.

Fit and compatibility: designed for Kyosho Mini-Z AWD series cars. Always compare your wheel hex and hub spacing to the 0mm offset and 8.3mm width to check for interference with suspension arms and body mounts on MR-03 AWD or equivalent chassis.

Installation and setup notes: these Delrin rims are intended to press onto standard 6-point Mini-Z AWD hubs and include pre-mounted tyres. After mounting, give the wheels a quick spin check and true them if needed to avoid excessive runout. When adjusting handling, modest changes to rim width or offset can shift scrub radius and track width, so run short tests before altering suspension geometry or weight distribution.

Tuning role: Delrin rims are valued for their low mass and consistent stiffness at this scale, producing predictable steering inputs and weight transfer. Use appropriate tyre inserts or compounds for the surface to refine grip and steering balance without changing electronics or gearing.