Mini-Z MR-01 Adjustable Camber Steering Block KM-018 1, 2 & 3 deg by 3Racing  [KM-018]

Camber tuning block for Mini-Z MR-01

The KM-018 camber steering block fits Kyosho Mini-Z MR-01 cars and gives three discrete camber positions at 1, 2 and 3 deg. This lets you change front wheel inclination without swapping springs or shocks, offering a compact way to refine handling on indoor and club tracks.

Designed for MR-01 compatibility, install the KM-018 in place of the factory steering block following your chassis service routine. The part alters effective camber at the hub and will produce noticeable differences in cornering grip and steering behaviour as you move through the settings.

Fitment tips: remove the front hubs and knuckles as needed on your MR-01, transfer bearings or retaining pins into the replacement block, and secure with the original fasteners. After fitment, double check steering geometry and confirm there is no binding over the full range of movement.

Setup advice: use the KM-018 to dial in more or less static camber to suit carpet or flat layout surfaces and to tweak turn-in performance without changing spring rates. Make changes in small increments and test each setting to understand its effect.