Mini-Z MR-015 Graphite Mount Plate for McLaren F1 GTR KZ-14/6/SG by 3Racing  [KZ-14/6/SG]

Product Details for MR-015 Plate

This graphite reinforced plate serves as an RC-scale replacement part for the Kyosho Mini-Z MR-015 chassis when used with a McLaren F1 GTR body shell. The component adds local stiffness at the body mounting area using graphite, without altering the baseline chassis geometry. This text describes compatibility and intended function rather than technical load ratings.

Fitment is constrained to MR-015 variants fitted with the McLaren F1 GTR style shell. Inspect your current body mount points and confirm alignment before installation. Avoid assuming cross-compatibility with other Mini-Z models without checking dimensions.

Installation outline: remove the original MR-015 body mount plate, align the replacement graphite plate to the factory holes, then secure with the same screws or equivalent fasteners. Apply moderate torque to prevent stressing the composite material. No additional mechanical or electronic changes are normally required.

Tuning notes: increasing stiffness at the body-to-chassis junction will influence steering response and weight transfer on a small-scale car. Make measured changes to suspension settings or body position after fitting to dial in balance. This part is intended for body fit refinement and chassis tuning only.