Mini-Z MR-02 Two-Tone 5-Spoke Rear Rim +2.0 Offset MR02-RP20/LB by 3Racing  [MR02-RP20/LB]

Rear aluminium rim for Kyosho Mini-Z chassis

This MR02-RP20/LB aluminium rear rim fits the Kyosho Mini-Z platforms shown in the title. It is an aftermarket wheel designed to replace standard plastic or alloy rims so you can alter tyre track and the model's appearance without changing drivetrain components.

The rim uses a five-spoke, two-colour finish with a +2.0mm offset to move the tyre seat outboard relative to the hub. On compatible MR-02 (MM/RM) and MR-015 cars this will change rear stance and scrub geometry. As only offset and spoke styling are specified, check hub bore dimensions and tyre clearance before you tighten everything up.

Fitment advice: remove the stock rear wheel following Mini-Z maintenance practice, confirm the hex seating and hub bore fit securely, and use the chassis original hex screw or nut where applicable. After installation, run the car slowly and inspect for tyre rub and wheel runout.

Setup tip: a +2.0mm offset is commonly used to widen the rear track slightly and influence lateral balance. Adjust tyre choice and shock/diff settings together with wheel changes to produce consistent handling outcomes.