MIP Puck Rebuild Pack for Yokomo YZ-2 Stock - Z2-17045  [Z2-17045]

Price:
NZD$31.88
Brand:
Yokomo
Model:
Z2-17045
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Drive Train Parts category
Write a review

Service parts for YZ-2 Stock MIP Puck

This kit supplies the spare components used by the MIP Puck drive on the YZ-2 Stock variant. It concentrates on replaceable wear items at the drive cup and joint interface so you can maintain the driveline without swapping major parts.

Contents target typical wear areas: retaining pins for the dogbone tip, multiple resin joint protectors to guard mating surfaces, the necessary fixing screws and a small tube of joint grease. Together these parts restore proper clearances and help maintain steady driveline feedback after many runs.

Assembly is simple if you have experience with YZ-2 Stock drivetrains: remove the worn protectors and pins, smear the supplied grease on contact faces, fit the new protectors and secure with the provided screws. Confirm free dogbone movement and recheck after a short session on track.

Kit contents

  • 2 pcs pins for bimetal dogbone tips
  • 16 pcs resin joint protectors
  • 4 pcs fixing screws
  • 1 tube joint grease

Specifications

  • Item MIP Puck drive cup protector rebuild kit contents
  • Material resin protectors and bimetal pins
  • Model Number Z2-17045
  • Compatibility B-YZ2DTM2S / B-YZ2DTM3 / B-YZ2CAL3

Compatible Models

  • B-YZ2DTM2S
  • B-YZ2DTM3
  • B-YZ2CAL3

Ideal as a service kit for YZ-2 Stock ver owners who need to renew wear items quickly and retain predictable driveline behaviour during tuning.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do the resin protectors affect wear?

The resin protectors shield the mating faces and absorb local abrasion, which reduces wear on harder drivetrain parts and helps keep clearance consistent.

Are the included bimetal pins different to stock pins?

The kit supplies bimetal pins intended for the dogbone tips; they are provided to replace worn pins and maintain reliable retention at the joint.

Can I reuse existing screws from my car?

It is recommended to use the supplied fixing screws for the best fit and to avoid issues with thread engagement; keep any service spares sealed until needed.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved