Yokomo Z2-18841 Replacement 67mm Dogbones for YZ-2 Stock MIP Pucks  [Z2-18841]

Yokomo Z2-18841 MIP Pucks Bi-metal dogbone 67mm for YZ-2 Stock ver.
Price:
NZD$48.18
Brand:
Yokomo
Model:
Z2-18841
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - Off-Road Drive Train Parts category
Write a review

Bi-metal Dogbones for MIP Pucks

The Yokomo Z2-18841 is supplied as two sets of bi-metal universal dogbones specifically produced for the MIP Pucks drive system used on YZ-2 Stock ver. chassis. These replacements are intended to provide improved wear characteristics while preserving the original driveline fitment and alignment.

Design and compatibility are focused: the dogbones interface directly with MIP Pucks couplers and the stock differential outputs on supported YZ-2 Stock variants. Replacement requires basic disassembly of the center drives and careful verification of puck alignment; no extra adapters are documented as necessary. Inspect pucks and retaining hardware during service to avoid uneven wear on the bi-metal surfaces.

Viewed as maintenance components, the Z2-18841 pieces support routine upkeep rather than radical tuning changes. Monitor the joint and contact areas under race or practice loads and replace the dogbones when wear or play becomes evident to protect the MIP Pucks and differential internals.

Specifications

  • Item: 2 sets of MIP Pucks bi-metal universal dogbones, 67mm
  • Material: Bi-metal
  • Model Number: Yokomo Z2-18841
  • Compatibility: B-YZ2DTM2S / B-YZ2DTM3 / B-YZ2CAL3 (YZ-2 Stock ver. with MIP Pucks)

Fit these dogbones when restoring MIP Pucks driveline operation or during scheduled maintenance, and confirm puck alignment and screw security after installation to maintain reliable drivetrain behavior.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What maintenance keeps the bi-metal dogbones lasting longer?

Regularly clean debris from joints, inspect mating faces for scoring, and ensure the pucks remain square to the dogbone ends; timely replacement prevents secondary wear to the pucks and diff output.

How does the bi-metal construction affect longevity?

The bi-metal build aims to balance surface wear resistance with a serviceable joint life. Expect better abrasion resistance than plain metals, but still monitor for fatigue and contact wear under heavy use.

What wear signs should prompt replacement?

Replace the dogbones if you observe visible scoring, increased play at the joint, or uneven contact marks that can accelerate damage to the MIP Pucks.

Are these suitable for high-traction surfaces?

They are serviceable under high-traction conditions, but such tracks increase wear rates; inspect parts frequently and plan replacements as part of regular maintenance.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved