Mr. Hobby GSI-B511 White Surfacer Primer - RC Paint Base  [GSI-B511]

Mr.Hobby GSI-B511 - Mr. White Surfacer
Price:
NZD$12.17
Brand:
Mr.Hobby
Model:
GSI-B511
Condition:
Brand New
Write a review

Surface Prep for RC Models with Mr. Hobby GSI-B511

Mr. Hobby GSI-B511 White Surfacer lays down a uniform white base that simplifies finishing on scale bodies and parts. It helps mask small defects and gives a predictable surface for colour coats.

What the Surfacer Does

The formulation fills minor scratches and produces a flat, consistent layer so subsequent paints spread evenly. That uniformity reduces the chance of mottled or uneven topcoats.

Spray Technique Tips

Keep the can moving and apply several thin passes rather than one heavy coat to avoid runs. Make sure each pass dries before proceeding, and handle sanding gently between layers to preserve detail.

Yes, it is suitable for most rigid kit plastics and metal parts. Always test on an inconspicuous area first and allow full drying before sanding or painting.
After the surfacer has dried, you can sand lightly with fine grit to smooth any orange peel or dust. Clean the surface of debris before applying the next coat.
A properly applied and cured surfacer gives a good base for decals, especially when it's sanded smooth. Use decal setting solutions as normal for best results.
Spray in thin layers, keep the nozzle at a steady distance, and allow sufficient flash time between passes. Tilt the model to spot potential drips while spraying.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved