Mr.Hobby GSI-C2 Gloss Black Paint 10ml - Miniatures Gloss Finish  [GSI-C2]

Mr.Hobby GSI-C2 - Gloss - Black - 10ml
Price:
NZD$5.45
Brand:
Mr.Hobby
Model:
GSI-C2
Condition:
Brand New
Write a review

Mr.Hobby GSI-C2 Gloss Black Paint 10ml for scale and figure detailing

When you need a concentrated glossy black, the Mr.Hobby GSI-C2 delivers in a 10ml lacquer pack ideal for detailed model projects. It enhances shading and sharpens panel lines on small-scale builds and character figures.

Suited to Fine Detail Tasks

The lacquer base of Mr.Hobby GSI-C2 is tuned for crisp application, giving a durable gloss that stands up to handling when applied over primer. It works well with both brushes and spray systems for careful model finishing.

Tips for Smooth Application

Apply multiple light coats rather than a single heavy layer, allowing full drying time between passes to prevent sagging. For airbrush use, thin gradually and keep a test surface handy to confirm spray pattern.

Is the paint compatible with resin kits?

Yes, it can be used on resin parts but surface prep is important. Clean and prime resin first to ensure adhesion and avoid issues with the lacquer finish.

How long does it take to dry between coats?

Drying times vary with temperature and humidity, but allow at least 15 to 30 minutes between thin coats and longer for full cure before handling.

Can I mix this with other lacquer colours?

Mixing with other lacquer paints is possible for custom shades, but mix small test batches to check compatibility and consistency before committing to a full job.

Are there ventilation or safety tips for spraying indoors?

Always work in a ventilated area or use an extraction fan and a respirator rated for solvent vapours when spraying lacquers to protect your health.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved