Mr.Hobby GSI-J110 Semi-Gloss Character Blue 100ml Spray  [GSI-J110]

Mr.Hobby GSI-J110 - Mr.Hobby #GSI-J110 - Semi-gloss - Character Blue - 100ml
Price:
NZD$13.58
Brand:
Mr.Hobby
Model:
GSI-J110
Write a review

Mr.Hobby GSI-J110 Character Blue Overview

Mr.Hobby GSI-J110 comes as a semi-gloss Character Blue in a handy 100ml can tailored for model work. Its moderate sheen makes it versatile for both vehicles and scenery without overpowering fine details.

What It Brings to Your Builds

The formula is aimed at hobby use, delivering even coverage when applied in controlled passes. The 100ml capacity is practical for finishing several small parts or touching up larger assemblies during a build session.

Application Advice for Best Results

Clean and dry the surface before spraying and shake the can vigorously until the mixing ball moves freely. Spray in light, overlapping strokes and allow adequate flash time between coats to prevent pooling.

Is this suitable for resin and 3D printed parts?

Yes, it can be used on resin and printed parts after proper cleaning and, if needed, a light primer to improve adhesion.

Can I topcoat over this paint?

You can apply a compatible clear coat to protect the finish; pick a clear product that matches the semi-gloss level you want.

How many thin passes should I use?

Typically two to four light passes work well depending on coverage and colour depth, with drying time between each pass to avoid sagging.

Any safety tips for spray use?

Use in a well ventilated area or spray booth, wear a suitable mask, and protect surrounding surfaces from overspray.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved