Mr.Hobby GSI-J16 100ml Semi-Gloss Thick Green Hobby Paint  [GSI-J16]

Mr.Hobby GSI-J16 - Mr.Hobby #GSI-J16 - Semi-gloss - Thick Green - 100ml
Price:
NZD$13.41
Brand:
Mr.Hobby
Model:
GSI-J16
Write a review

Mr.Hobby GSI-J16 Thick Semi-Gloss Green for Scale Modelling

The Mr.Hobby GSI-J16 is supplied in a 100ml size and gives a semi-gloss thick green finish ideal for kit builders and figure painters. It is part of the Mr.Color Spray Series, appreciated for vivid colour and dependable hiding power.

Satin Shine with Easy Application

The thicker consistency of GSI-J16 helps you apply a smooth satin gloss that highlights details without excessive glare. Its body makes it forgiving during application, often reducing the number of coats required.

Durable Colour That Matches Expectations

Model enthusiasts favour the GSI-J16 for steady colour performance and a clean surface finish. It works well when tackling both fine detail areas and larger painted sections, producing a cohesive result.

Is priming necessary before using this paint?

Priming is recommended for best adhesion and to even out varied surfaces, though smooth, clean parts may accept the paint directly.

Can I use a brush or should I airbrush it?

The paint can be applied with a brush for small details, but for the smoothest finish on larger areas an airbrush or spray method is preferred.

What drying time should I expect between coats?

Drying times vary with temperature and humidity; allow each thin coat to set before adding the next to prevent tackiness.

Any advice for masking and layering?

Use low-tack masking and wait until the paint is fully cured before removing tape to avoid lifting the finish.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved