Mr.Hobby GSI-J47 Gloss Clear Red 100ml for Modellers  [GSI-J47]

Mr.Hobby GSI-J47 - Mr.Hobby #GSI-J47 - Gloss - Clear Red - 100ml
Price:
NZD$13.41
Brand:
Mr.Hobby
Model:
GSI-J47
Write a review

Mr.Hobby GSI-J47 Clear Red Gloss Coat

The Mr.Hobby GSI-J47 Clear Red gloss is a dependable option for modellers finishing scale kits and display figures. The 100ml volume supplies enough paint for multiple small projects while keeping colour clarity and shine.

Recommended Uses for Scale Work

Use this clear red to boost colour intensity and add a reflective gloss that flat paints cannot achieve. It is suited to fine detail work on figure faces, armour panels and ornamentation when applied in controlled coats.

Techniques for Smooth Results

Spray or brush on light coats, letting each layer dry fully to build a uniform gloss. Prepare the model with a clean, primed surface to improve grip and reduce the chance of imperfections.

Can this be mixed with other clear paints?

Mixing different clear systems is not recommended unless you know they share the same base. For consistent results, stick to compatible clears or small test blends.

What primer works best under this gloss?

A smooth, compatible primer suited to the base material will help adhesion and improve the final gloss. Light sanding between primer and topcoat can also help.

Does it require a lacquer sealer?

If you need extra protection or higher gloss stability, apply a compatible clear lacquer after the red has fully cured. Test on a scrap piece first.

How long before the finish is fully cured?

Drying times vary with temperature and layer thickness; allow several hours between coats and up to a few days for full cure under normal conditions.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved